Filter
Top Products
6-2
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 6 Cisco ASR 1002 Router Overview and Installation
Cisco ASR 1002 Router Description
• A built- in 4x1GE Interface providing four SFP based GE connections, designated as SPA bay 0.
Note The built-in Gigabit Ethernet ports on the Cisco ASR1002 Router support the same small
form-factor pluggable (SFP) optical transceivers as the 5x1 GE SPA. For specific shared port
adapter SFP compatibility listings, go to Chapter 1 in:
http://cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR10
00/ASRspahw.pdf
(This does not include the Ethernet management port on the Cisco ASR1000-RP1.)
The Cisco ASR 1002 Router supports upgradeable Cisco ASR1000-ESP5 or ASR1000-ESP10 assembly
and the power supply modules as field-replaceable units. The Cisco embedded ASR1000-SIP10 and
Cisco embedded ASR1000-RP1 assemblies are fixed into the chassis and are not upgradeable; but the
shared port adapters in the SIP are field upgradable.
This section contains the following topics:
• Front View, page 6-2
• Rear View, page 6-3
• Cisco ASR 1002 Router Components, page 6-4
Front View
Figure 6-1 shows the Cisco ASR 1002 Router with modules installed.
Figure 6-1 Cisco ASR 1002 Router —Front View
Note The SPAs in subslots 1-3 are field upgradeable. The SIP that the SPAs reside in is not field-upgradeable
and the Cisco ASR1000-RP1 is embedded in the chassis and not field upgradeable.
1 Embedded ASR1000-RP1 in the subslot and
represents the built in 4xGE SPA.
3 SPA subslot 1
2 SPA subslot 2 4 SPA subslot 3
ASR 1002
pwr
stat
min
maj
crit
STAT
QE0 QE1 BOOT
C
A
R
R
I
E
R
LINK PWR STATQE2 QE3
SPA-4XOC3-POS
S
T
AT
U
S
0
1
2
3
C
/A
A
/
L
C
/A
A/L
C
/
A
A
/L
C
/
A
A
/L
SPA-4XOC3-POS
S
T
A
T
U
S
0
1
2
3
C
/
A
A
/
L
C
/
A
A/
L
C
/
A
A
/
L
C
/
A
A/
L
SPA-4XOC3-POS
S
T
A
T
U
S
0
1
2
3
C
/
A
A/
L
C
/
A
A
/
L
C
/
A
A/
L
C
/
A
A/
L
STBY
ACTV
STAT
ASR1000-ESP10
PWR
1
2
3
4
280369