Filter
Top Products
8-18
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 8 Replacing Cisco ASR 1000 Series Routers Field-Replaceable Units
Removing and Replacing the Cisco ASR 1000 Series Embedded Service Processors
Step 2 Using the handles on both sides of the module, with two hands gently slide the Cisco ASR 1000 Series
Embedded Services Processor (ESP5, ESP10, ESP20) out of the chassis slot.
Note Handle the Cisco ASR1000-ESP5, Cisco ASR1000-ESP10, or Cisco ASR1000-ESP20 by the
carrier edges only; never touch the printed circuit board components or connector pins.
Step 3 Place the Cisco ASR1000-ESP5, Cisco ASR1000-ESP10, or Cisco ASR1000-ESP20 on an antistatic
surface with its printed circuit board components facing upward or in a static shielding bag.
You have completed the removal procedure for the Cisco ASR 1000 Series Embedded Services
Processor. from a Cisco ASR1000-ESP.
Replacing the Cisco ASR1000-ESP
To replace the Cisco ASR 1000 Series Embedded Services Processor in the Cisco ASR 1000 Series
Router, follow this procedure:
Step 1 Attach an ESD-preventive wrist strap between you and an unfinished chassis surface.
Step 2 Remove the new Cisco ASR1000-ESP from its static shielding bag.
Step 3 Using both hands, grasp the Cisco ASR1000-ESP by its metal carrier edges and orient the it so that its
printed circuit board components are upward.
Caution Handle the Cisco ASR1000-ESP by the carrier edges and handle only; never touch the printed circuit
board components or connector pins.
Step 4 Align the left and right edges of the Cisco ASR1000-ESP printed circuit board between the Cisco
ASR1000-ESP slot guides.
Step 5 Gently slide the Cisco ASR1000-ESP all the way into its chassis slot until you feel the connectors seat
with the router midplane.
Step 6 Seat the Cisco ASR1000-ESP in the router midplane by tightening its captive installation screws with a
number
2 Phillips or a 3/16-inch flat-blade screwdriver.
This completes the procedure for replacing the Cisco ASR1000-ESP in a Cisco ASR1000 Series Router.