Filter
Top Products
A-2
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Appendix A Cisco ASR 1000 Series Routers Specifications
Cisco ASR 1006 Router Specifications
Cisco ASR 1006 Router Memory and Storage Options
Table A-2 lists the hardware memory and storage options supported on the Cisco ASR 1006 Router.
Cisco ASR 1006 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1006 Router has an RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port
supports IEEE
802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with
10BASET, 100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45
connectors. Cisco does not supply Category 5 UTP cables; these cables are available commercially.
Figure A-1 shows an RJ-45 port and connector.
Figure A-1 RJ-45 Port and Connector for Cisco ASR 1006 Router
Cisco ASR 1006 Router MGMT Ethernet Port Pinouts
Table A-3 lists the RJ-45 port pinout for the front panel Management Ethernet port.
Table A-2 Memory and Storage Options for Cisco ASR 1006 Router
Memory Type Default Maximum System Support
RP1 2 GB DRAM 4 GBDRAM
eUSB 1 GB (Partitioned: 2x32MB for
NVRAM and the remaining for
mass storage
Hard disk drive 40 GB for code storage or solid-state
drive 32Gb support
1 RJ-45 connector
57574
12345678
1
Table A-3 RJ-45 Management Ethernet Port Pinouts
Pin Signal Direction Description
1 TX Data+ Out Transmit Data
2 TX Data– Out Transmit Data
3 RX Data+ In Receive Data
4, 5 NC