Filter
Top Products
Glossary
GL-2
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Control address
IP address on the SBE or DBE used for terminating the H.248 control traffic between SBE and SBE.
Cisco
ASR1000-ESP5
ASR1000-ESP10
ASR1000-ESP20
The Cisco ASR 1000 Series Embedded Service Processors (ASR1000-ESPs) are based on the Cisco
QuantumFlow Processor for next-generation forwarding and queuing in silicon. The ASR1000-ESP5,
ESP10, and ESP20 provide two centralized forwarding-engine options for the Cisco ASR 1000 Series
Aggregation Services Routers.
The Cisco ASR 1000 Series ESPs are responsible for the data-plane processing tasks and all network
traffic flows through them. They are also responsible for features such as firewalls, intrusion
prevention, Network Based Application Recognition (NBAR), and Network Address Translation
(NAT).
Cisco ASR 1006
Router
The Cisco ASR 1006 Router is a 6-rack unit (RU) chassis. It has the option of dual route processor and
embedded services processor support with 10Gbps throughput support. It also supports up to 12 shared
port adapters (SPAs), which makes it the highest port density solution of the three Cisco ASR 1000
Series Routers.
Cisco ASR 1004
Router
The Cisco ASR 1004 Router is a 4-rack unit (RU) chassis that supports up to 8 shared port adapters
(SPAs) and comes with one route processor and one embedded services processor slot. The Cisco ASR
1004 Router provides 10 Gbps throughput support.
Cisco ASR 1002
Router
The Cisco ASR 1002 Router is a 2-rack unit (RU) chassis that comes with an integrated route processor
and a serial interface processor. It houses three shared port adapter (SPA) slots supporting half height
and full height SPAs. Configurable with either the 5Gbps or 10Gbps embedded services processor and
four built-in Gigabit Ethernet ports.
Cisco QuantumFlow
Processor
The forwarding processor chipset, which is on the ESP, for the Cisco ASR 1000 Series Router
consolidated
package
A single software image containing multiple sub-packages and a provisioning file. Cisco IOS XE
software is released using consolidated packages, and Cisco ASR 1000 Series Routers can be run using
a consolidated package or individual packages.
CPE
Customer premises equipment
CTS
Cisco Trusted Security. Cisco-defined protocols and procedures for user and device authentication and
role-based access control (includes packet tagging across network)
D
DBE
Data border element. Represents the media-handling portion of the SBC, controlling access of media
packets to the network.
DB-25
AC power supply DB-25 alarm connector—A female DB-25 D-sub connector which enables you to
attach an external alarm monitoring facility to the router, thus supporting a telco-style of handling
alarm conditions in the router.
DCE
Data communication equipment. Provide clocking to DTE. Console port of UART.
DDR
Double Data Rate—Data transfer method that transfers data on both clock edges.
DES
Data Encryption Standard algorithm