Filter
Top Products
2-11
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 2 Cisco ASR 1000 Series Routers Components
Cisco ASR 1000 Series Embedded Services Processors
The Cisco ASR 1000 Series Embedded Services Processor (ESP) consists of a front panel label for
indicator and control functions. The Cisco ASR 1000 Series Embedded Services Processor model
number labeling is located next to the left card module handle. The module also contains card handles
to assist in insertion or removal of the module.
Figure 2-5 shows the Cisco ASR 1000 Series Embedded Services Processor LEDS on the front panel.
Note The Cisco ASR 1000 Series embedded services processors have the same faceplate and status
information except for the name label, such as Cisco ASR1000-ESP20, Cisco ASR1000-ESP10, Cisco
ASR1000-ESP10-N, or Cisco ASR1000-ESP5.
Table 2-5 Differences in Cisco ASR1000 Embedded Services Processors
Feature Cisco ASR1000-ESP5 Cisco ASR1000-ESP10 Cisco ASR1000-ESP20
Memory 256MB Cisco QuantumFlow
Processor, 10Mb TCAM,
64MB packet buffer, and
1GB FECP DRAM
512MB Cisco QuantumFlow
Processor, 10Mb TCAM, and
128MB packet buffer, and 2GB
FECP DRAM
1GB Cisco QuantumFlow Processor,
40Mb TCAM, 256MB packet buffer,
4GB FECP DRAM
Performance 4 Mpps for the combination
of the following
commonly-used features:
IPv4 forwarding, IP
Multicast, ACL, QoS,
Reverse Path Forwarding
(RPF), load balancing, and
Sampled NetFlow
8 Mpps forwarding for the
combination of the following
commonly-used features: IPv4
forwarding, IP Multicast, ACL,
QoS, Reverse Path Forwarding
(RPF), load balancing, and
Sampled NetFlow
16 Mpps forwarding for the
combination of the following
commonly-used features: IPv4
forwarding, IP Multicast, ACL, QoS,
Reverse Path Forwarding (RPF), load
balancing, and Sampled NetFlow
Bandwidth 5Gbps of bandwidth 10Gbps of bandwidth 20Gbps of bandwidth
Security Traffic
Performance
1Gbps 3 Gbps 8Gbps
Product
Compatibility
Located in slot 1 and is
labeled F0 in the Cisco ASR
1002 Router only
Located in:
• Cisco ASR 1006 Router
physical slots 3 and 4 and are
labeled F0 and F1.
• Cisco ASR 1004 Router
physical slot 1 and is labeled
F0.
• Cisco ASR 1002 Router
physical slot 1 (top slot) and
is labeled F0.
Located in:
• Cisco ASR 1006 Router physical
slots 3 and 4 and are labeled F0
and F1.
• Cisco ASR 1004 Router physical
slot 1 and is labeled F0.
Note The Cisco ASR 1002 Router
does not support the
Cisco ASR1000-ESP20.