Filter
Top Products
8-48
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 8 Replacing Cisco ASR 1000 Series Routers Field-Replaceable Units
Repacking the Box
Step 8 Place the power supply standby switch to the On (I) position. The power supply LEDs light when power
is supplied to the router.
Repacking the Box
If your system is damaged, you must repack it for return shipment.
To return or move the Cisco ASR 1000 series Router to a different location, follow these instructions for
repacking the system, using the original packaging material:
Step 1 Place the bottom packing material section inside the bottom of the shipping container.
Step 2 Use at least two people to place the Cisco ASR 1000 Series Router inside the container. Be sure that the
chassis is positioned correctly before you lower it inside the container.
Step 3 Place the top packing material over the top of the Cisco ASR 1000 Series Router.
Step 4 Place both accessory boxes inside the cutouts in the top section of the packing material.
Step 5 Fold the outside carton down over the top of the accessory boxes and seal with packing tape.
Step 6 Wrap two packaging straps tightly around the top and bottom of the package to hold the outside carton
and the bottom pallet.
Caution Do not use tape to hold the outside carton to the bottom pallet. Packaging straps must be used.
This completes the procedure for repacking the shipping container.