Filter
Top Products
A-5
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Appendix A Cisco ASR 1000 Series Routers Specifications
Cisco ASR 1004 Router Specifications
Cisco ASR 1004 Router Specifications
This section lists the specifications for the Cisco ASR 1004 Router.
Table A-8 lists the Cisco ASR 1004 Router physical specifications.
Cisco ASR 1004 Router Memory and Storage Options
Table A-9 lists the hardware memory and storage options supported on the Cisco ASR 1004 Router.
Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1004 Router has RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port
supports IEEE
802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with
10BASET, 100BASETX, and 1000BASET specifications.
Table A-8 Cisco ASR 1004 Router Specifications
Description Specification
Midplane Connects the Cisco ASR 1000 Series RP1, ASR 1000 Series ESP, Cisco ASR 1000 Series
SPA Interface (SIP), SPAs, and power supplies together in the system
Dimensions (H x W x D) Height = 7 in. (17.8 cm) (4RU rack-mount per EIA RS-310)
Width = 17.25 in. (43.815 cm) (19 inch rack-mount or optional 23 Telco rack- mount)
Depth = 22.50 in. (57.15 cm) (including card handles, cable-management brackets and
power supply handles)
Weight 50 pounds (fully configured)
22.6796 kg
Nominal operating temperature • 41° to 104° F
• 5° to 40° C
Nominal operating humidity 10% to 85%
Storage temperature • –38° to 150° F
• –40° to 70° C
Power consumption • Maximum DC: 1020W
• Maximum AC: 960W
• Maximum (Out): 765W
Table A-9 Memory and Storage Options for Cisco ASR 1004 Router
Memory Type Default Maximum System Support
RP1 2 GB DRAM 4 GBDRAM
eUSB 1 GB (Partitioned: 2x32MB for
NVRAM and the remaining for
mass storage
For mass storage: hard disk drive 40 GB or solid-state
drive 32Gb support