Filter
Top Products
1-14
Cisco ASR 1000 Series Aggregaion Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 1 Cisco ASR 1000 Series Routers Hardware Overview
Functional Overview
PID: ASR1004 , VID: V00, SN:
NAME: "module 0", DESCR: "Cisco ASR1000 SPA Interface Processor 10"
PID: MCP-CC , VID: V00, SN: JAB1104064G
NAME: "SPA subslot 0/1", DESCR: "2-port OC3/STM1 POS Shared Port Adapter"
PID: SPA-2XOC3-POS , VID: V01, SN: JAB1006095Z
NAME: "subslot 0/1 transceiver 0", DESCR: "OC3 SR-1/STM1 MM"
PID: N/A , VID: , SN: 2008692
NAME: "SPA subslot 0/2", DESCR: "4-port T3/E3 Serial Shared Port Adapter"
PID: SPA-4XT3/E3 , VID: V01, SN: JAB09210247
NAME: "module R0", DESCR: "Cisco ASR1000 Route Processor 1"
PID: ASR1000-RP1 , VID: V00, SN: JAB110200CQ
NAME: "module F0", DESCR: "Cisco ASR1000 Embedded Services Processor, 10Gbps"
PID: ASR1000-ESP10 , VID: V00, SN: JAB111101A1
NAME: "Power Supply Module 0", DESCR: "Cisco ASR1004 AC Power Supply"
PID: ASR1004-PWR-AC , VID: V00, SN: ART1103K00C
NAME: "Fan Module 1", DESCR: "Cisco ASR1004 Fan Module"
PID: ASR1004-FAN , VID: V00, SN: ART1052L01U
Example 1-4 Show Platform Command
The show platform command displays the output of the current wait policy for each type of connection,
as well as any information on the currently configured banners.
Following is sample output of the show platform command:
Router#show platform
Chassis type: ASR1004
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 MCP-CC ok 16:20:27
0/1 SPA-2XOC3-POS ok 16:18:49
0/2 SPA-4XT3/E3 ok 16:18:56
R0 ASR1000-RP1 ok, active 16:20:27
F0 ASR1000-ESP10 ok, active 16:20:27
P0 ASR1004-PWR-AC ok 16:19:27
P1 ASR1004-FAN ok 16:19:27
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 07091401 12.2(33r)XN1
R0 0706210B 12.2(33r)XN1
F0 07051650 12.2(33r)XN1
Example 1-5 Show Diag Command
The show diag slot R0 eeprom detail command displays the configuration hardware information
including DRAM and Static RAM (SRAM) on line cards. To display more details than the normal show
diag command output, use show diag [slot-number] [details].
Following is sample output of the show diag slot R0 eeprom detail command: