Filter
Top Products
5-4 Service Calibrations
HP DesignJet CP Series Printers
7 Color Calib. ' page 5-16 (Only available in the HP DesignJet
2500CP/3500CP printer)
The purpose of this calibration is to determine a correction function to be
applied in PostScript in order to match the color reproduction of a
nominal Printer. This Calibration is necessary to improve color
consistency between different prints and different Printers. This
calibration is also independent of color accuracy or matching color from a
monitor to the Printer.
8 Service Accuracy ' page 5-17
The purpose of this calibration is to calibrate the nominal advance of the
media. This calibration is necessary to control the exact movement of the
media in order to avoid print quality problems like banding.
9 Maintenance ' page 5-19
The purpose of this calibration is to read and, if necessary, adjust the
preventive maintenance counter, which counts the number of swaths.
10 Font Type Set ' page 5-20 (Only available in the HP DesignJet
2500CP/3500CP printer)
The purpose of this calibration is to check and, if necessary, select a Font
type (only possible when the printer detects that a new Hard Disk has
been installed or when installing a new Electronics Module).