Filter
Top Products
System Error Codes
2-15
HP DesignJet CP Series Printers
System Error: 010042 0000000X
Problem Description: The status of one of the optical sensors is not
stable when it should be.
Error data (X):
0 ³ Problem with the Media Sensor.
1 ³ Problem with the Pinch-arm Sensor.
2 ³ Problem with the Refill Assembly Sensor.
3 ³ Problem with the Elevator Sensor.
4 ³ Problem with the Service Station Sensor.
5 ³ Problem with the Primer Sensor.
Corrective Action: Try the following:
D Make sure that all sensors are connected
correctly.
D If the error code is related to the Service
Station or the Primer then:
S Make sure that the Service Station
Interconnect Cable (the black cable that
connects the Service Station to the
Electronics Module) is correctly connected
to the Electronics Module.
S Replace the Service Station Interconnect
cable ' Page 8-87.
D If the error code is related to the Refill
Assembly or the Elevator then:
S Make sure that the Refill Interconnect
Cable (the black cable that connects the
Refill Assembly and Elevator to the
Electronics Module) is correctly connected
to the Electronics Module.
S Replace the Refill Interconnect cable '
Page 8-87.
D If the Error is related to the Pinch-arm sensor
then replace the Pinch-arm Sensor ' Page
8-84.
D If the Error is related to the Refill Assembly
Sensor then replace the Refill Assembly '
Page 8-55.