HP (Hewlett-Packard) 2000CP 2500CP Printer User Manual


 
Troubleshooting
1-19
HP DesignJet CP Series Printers
How Do I Print some of the Internal Prints?
The Service Print
The purpose of the Service Print is to give information about the operating
conditions, Usage Level, Serviceability and the MIO Configuration. This
Print is very useful when troubleshooting the Printer, as it gives you
information regarding the firmware revision, the last system error and the
internal sensors.
If the EEROM is cleared, you will loose all the information on the
Service Print (including the MIO Configuration).
Print the Service Print as follows:
Load media (A4 minimum) before printing the Service Print.
1 In the Utilities submenu, scroll to “Service Tests” and press Enter.
SERVICE TESTS
Service print
2 Scroll to “Service Print” and press Enter.
3 The Service Print will then be printed.