Filter
Top Products
2-16 System Error Codes
HP DesignJet CP Series Printers
D If the Error is related to the Elevator Sensor
then replace the Elevator Assembly ' Page
8-52.
D If the Error is related to the Service Station
Sensor then replace the Service Station
Assembly ' Page 8-26.
D If the Error is related to the Media
Sensor/Media Button then:
The Media Button is only applicable to HP
DesignJets 3500CP and 3000CP.
S Make sure that the Media Sensor/Media
Button is installed correctly.
S Make sure that the cable for the Media
Sensor/Media Button is connected correctly.
S Replace the Media Sensor ' Page 8-78.
S Replace the Media Button ' Page NO TAG.
D If the Error is related to the Primer Sensor
then replace the Primer Assembly ' Page 8-29.
D Replace the Electronics Module ' page 8-6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.
System Error: 010043
Problem Description: Problem with the Carriage Board.
Corrective Action: Try the following:
D Make sure that the Trailing Cable is connected
correctly.
D Replace the Carriage Assembly ' page 8-42.
D Replace the Electronics Module ' page 8-6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.