Filter
Top Products
2-8 System Error Codes
HP DesignJet CP Series Printers
System Error: 010032 000000XX
Problem Description: Fan Test Failed - Current not detected in one or
both fans.
Error data (XX):
1 ³ Electronics Module fan not running.
2 ³ Service station fan not running.
3 ³ Both fans not running.
10 ³ Electronics Module fan is short-circuited.
20 ³ Service Station fan is short-circuited.
30 ³ Both fans are short-circuited.
12 ³ Service Station fan is not running and the
Electronics Module fan is short-circuited.
21 ³ Electronics Module fan is not running and
the Service Station fan is short-circuited.
Corrective Action: Try the following:
D Make sure that the Service Station fan is
connected correctly to the interconnect PCA.
D If both fans fail, replace the Electronics
Module ' page 8-6.
D If the error code is related to the Service
Station:
S Make sure that the Service Station
Interconnect Cable is correctly connected to
the Electronics Module.
S Replace the Service Station interconnect
cable ' Page 8-87.
S Replace the Service Station Assembly '
page 8-26.
D Replace the Electronics Module ' page 8-6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.