3-8 User Messages
HP DesignJet CP Series Printers
Message Explanation and Action
Media too small for
calibration
→
The media you loaded for printhead alignment or a printhead check is too small.
The procedure has been cancelled. You may continue printing without calibrating
the printer, but the image quality is not assured.
Press ↓ to continue. If you want to complete the interrupted procedure, reload
with appropriate media (A3–size paper or larger, in landscape orientation) and
redo the procedure:
• Use Image quality / Printhead service / Align now for printhead
alignment.
• Use Image quality / Printhead service / Printheads check / Now for a
printhead check.
MIO error
Communication
break
The flow of data from the computer to the printer stopped prematurely (for
example, the computer may have been shut down before all data was sent).
Press Enter to clear the message from the front panel display.
MIO error
handshake
You configured the modular interface incorrectly.
Press the Enter key to clear the message from the front panel. Check the
handshake settings in the printer’s front panel, in the hardware configuration,
and in your application software configuration to make sure they are
compatible with one another.
Mispositioned
Reload roll
The roll media is mispositioned.
Remove and reload the roll.
Mispositioned
Reload sheet
The sheet media is mispositioned.
Remove and reload the sheet.
MISSING INK
SYSTEM
Install→
One or more ink systems are missing.
Press ↓ or the Replace Ink System key to install the ink systems in order to
print with your printer.
Mixed ink system
-JJJ→
At power–on or after the ink systems have been serviced, the printer has detected
components of different ink system types (for example, Imaging and UV
Pigmented). Printing will be disabled until the ink systems are all of the same
type. The flashing squares indicate which ink systems need checking. The error
may be because
the printhead, printhead cleaner and ink cartridge within an
ink system are not all of the same type (UV Pigmented or Imaging) or that
entire ink systems are of different types.
Press ↓ to continue, to check the ink systems.