Filter
Top Products
2-6 System Error Codes
HP DesignJet CP Series Printers
System Error: 010030
Problem Description: One of the two interconnect boards not detected.
Corrective Action: Try the following:
D Make sure that the Interconnect Cables (the
two black cables that connect the Refill
Assembly and the Service Station Assembly to
the Electronics Module) are correctly connected
to the Electronics Module.
D Replace the interconnect cables:
S Service Station Interconnect
Cable ' Page 8-87.
S Refill Interconnect Cable ' Page 8-87.
D Replace the Refill Interconnect PCA ' page
8-64.
D Replace the Service Station Assembly ' page
8-26.
D Replace the Electronics Module ' page 8-6.
Only replace one component at a time and
check if the error has gone before replacing
another component. Using this procedure
you will be able to determine exactly which
component failed.