Filter
Top Products
System Error Codes
2-31
HP DesignJet CP Series Printers
HP DesignJet 2500CP/3500CP only
System Error: 08xxxx
Problem Description: PostScript Error.
Corrective Action: Make sure you have the latest version of the Flash
SIMM (firmware) installed or upgrade the
firmware revision of the Flash SIMM ' page 1-3.
If the error code remains after installing the latest
Flash SIMM then report the error to the HP
Response Center or the nearest HP Support
Office, stating the following information:
D Model and Serial Number of the printer.
D the complete error number.
D service print (Utilities / Service Tests).
D plot file where the error has occurred.
D additional comments about the usage, the
setting, etc..
HP DesignJet 2500CP/3500CP only
System Error: 080001
Problem Description: Hard Disk Drive installed without PostScript.
Corrective Action: Install the PostScript SIMM in the 2nd slot from
the left in the Electronics Module.