Filter
Top Products
3. To release the oiler-belt gate, turn the wing nut counterclockwise.
4. Open the oiler-belt gate.
5. Allow the oiler belt to cool for at least 10 minutes.
6. Lower the hot roll shield.
7. Spread papers on the floor or place a wastebasket under the oiler belt.
8. Use a piece of lightweight cardboard to scrape paper dust and paper chads
from the oiler belt.
9. Raise the hot roll shield.
10. Close the oiler-belt gate.
11. Turn the wing nut clockwise to latch the gate. Ensure that the gate is firmly
latched.
12. Close the stacker end cover.
13. The fuser begins a warm-up cycle. To make the printer ready, SELECT the
Ready pushbutton on the Display Touch Screen window.
Printing resumes when the fuser completes its warm-up cycle.
HC6OG051
FORMS WIDTH
18171615141312111098
F
O
RMSWIDT
H
18 1716 1514131211 1098
Chapter 6. Operator Responsibilities 87