Filter
Top Products
Configuring Remote Access
This procedure lets you enable and configure remote access to the printer. You can
use these methods:
v SNMP (Simple Network Management Protocol)
v RMI (Remote Management Interface)
v Modem.
To configure remote access, do the following:
1. SELECT the Configure pull-down menu on the main Display Touch Screen
window.
2. SELECT the Remote Access procedure.
3. SELECT the type of remote access that is to be used.
4. Enable or disable remote access for the type of remote access that you chose in
the previous step.
Note: If Allow to Configure is set to Yes for SNMP or RMI, that interface is
allowed to remotely change selected printer configuration items.
Chapter 8. Configuring the System 245