Filter
Top Products
NPRO
Non-process runout (NPRO) moves forms forward through the forms path.
See “Advancing Forms Using the NPRO and NPRO Page Functions” on
page 75 for more information.
NPRO Page
Moves the forms forward to the next top-of-form position. See “Advancing
Forms Using the NPRO and NPRO Page Functions” on page 75 for more
information.
Shutdown/Restart
Lets you shutdown or restart the printers.
v Shutdown closes all of the active procedures, disables host attachments,
and safely prepares the system so that you can power off the control
unit. In duplex mode, Shutdown affects the complete system. In simplex
or dual simplex mode, Shutdown applies to just the printer for which
the procedure was selected. You can still use the other printer.
v Restart unloads and then reloads the control unit internal code. This
resets pointers, counters, and other controls. In duplex mode, the
complete system (both printers) undergoes a Restart. In simplex or dual
simplex mode, the Restart applies only to the printer you are restarting.
You can still use the other printer.
See “Shutting Down and Restarting the System” on page 61 for more
information.
46 InfoPrint 3000 Operator’s Guide