Filter
Top Products
17. Clean the cover to remove any excess developer mix, and put it in a safe
place.
Important
Ensure that the developer drain is closed.
18. Press the Developer Run Pushbutton A and slowly pour the developer mix
into the inlet.
If the developer stops running before the new developer mix bottle is empty,
press the Developer Run Pushbutton A again.
19. Clean the empty developer mix bottle with a cloth or paper towel to remove
any excess developer mix. Store the bottle in the recess at the right of the
forms input area in front of the drain hose for the next time you change
developer mix.
Operator Tip
If you already have several empty developer mix bottles in storage, you
may discard the extra bottle.
198 InfoPrint 3000 Operator’s Guide