Filter
Top Products
Table 16. Printer Configuration Items (continued)
Configuration Item Description Value Options
Beam 5 offset
adjustment for
Printer 2 (D)
(See information in Beam 1 offset adjustment) (See information in Beam 1 offset
adjustment)
Machine Sequence
for Printer 1
(CE Change on Initial Configuration Only) This is the
serial number for Printer 1 (7 numeric only characters).
Each time the AFCCU hard disk is replaced, this data is
lost; the CE must enter the serial number found on the
rear inside of the AFCCU frame again.
N/A
Manufacturing Plant
for Printer 1
(CE Change on Initial Configuration Only) This is the
code for plant of manufacture of Printer 1 (2 numeric
only characters). Each time the AFCCU hard disk is
replaced this data is lost; the CE must enter this code
again from information saved from the last time Printer
Configurations were changed.
N/A
Machine Sequence
for Printer 2
(CE Change on Initial Configuration Only) This is the
serial number for Printer 1 (7 numeric only characters).
Each time the AFCCU hard disk is replaced, this data is
lost; the CE must enter the serial number found on the
rear inside of the AFCCU frame again.
N/A
Manufacturing Plant
for Printer 2
(CE Change on Initial Configuration Only) This is the
code for the plant of manufacture of Printer 2 (2 numeric
only characters). Each time the AFCCU hard disk is
replaced, this data is lost; the CE must enter this code
again from information saved from the last time Printer
Configurations were changed.
N/A
Date and Time (CE Change Only). This is in the form of
mmddHHMM.ssyy. mm=month dd=day HH=hour
MM=minute ss=second yy=year
N/A
228 InfoPrint 3000 Operator’s Guide