Filter
Top Products
Out Of Supplies Messages
Out of Supplies messages specify an operator task that needs to be done involving
printer supplies. Figure 40 shows a sample Out of Supplies window.
This window contains the following:
v The name of the supply and the action that is required.
v An indication of which printer needs attention.
v A step-by-step procedure to follow.
v Function pushbuttons:
Check Reset
Informs the control unit that you have completed all actions necessary to
replenish the supply item.
For supply actions that may be postponed, this pushbutton allows you
to postpone the action and place the printer back into Ready status.
Help Displays help information.
Notes
v You may be able to temporarily postpone replacing some of the supplies
(such as the fuser oil, developer mix, and fine filter). You must replace
toner and the toner collector as soon as the out-of-supplies condition
occurs. See “Chapter 7. Ordering and Replacing Supplies” on page 175 for
more information.
v All Out of Supplies messages appear in the printer Display Touch Screen
area for the printer on which the error occurred.
v See Table 30 on page 281 for a list of all messages of this type.
Figure 40. Out of Supplies Window
276 InfoPrint 3000 Operator’s Guide