Filter
Top Products
Changing the Developer Mix
Attention!
You must leave printer power on while you do this task, but the printer
should not be printing.
Using the wrong developer mix can cause serious print quality problems; this
can force a service call. See Table 15 on page 177 for the correct developer mix
part number.
Do this task when you see the following message:
CHANGE DEVELOPER MIX 0788
Note: You do not have to replace developer mix the first time you see the CHANGE
DEVELOPER MIX message. To bypass the message, SELECT the Ready
pushbutton on the main Display Touch Screen.
The CHANGE DEVELOPER MIX message reappears each time end-of-forms is reached,
or every 4 000 feet of forms thereafter. When 50 000 additional feet of forms have
been processed since the message originally appeared, you must change developer
mix before you can return the printer to Ready status.
Operator Tips
v Developer mix is slippery, and working with it can be messy. You may
want to spread papers on the floor under the developer drain hose and
under the developer mix inlet to catch spills.
v If you get developer mix on your hands, wipe it off as soon as possible.
You need the following items when you change the developer mix:
v Developer mix
v An empty developer mix bottle
v Soft cloth or paper towels.
Chapter 7. Ordering and Replacing Supplies 191
|
|