Filter
Top Products
1. Open the front center left and right covers and the top left cover.
2. Clear the forms, if possible, from the forms input area. If you cannot remove
the forms from the input area, do the following:
v If you are using boxed fan-fold forms, slide the box of forms as far to the
left (stacker end of the printer) of the forms input area as possible.
v If you are using a preprocessing device supplying forms under the printer
up into the forms input area, create enough slack in the forms supply so
that you can move the forms to the far left side of the forms input area.
Spread paper towels on top of the forms and on the floor of the forms input
area.
3. Remove the empty developer mix bottle from its storage slot at the right of the
forms input area.
192 InfoPrint 3000 Operator’s Guide