Filter
Top Products
Chapter 6. Operator Responsibilities
Controlling the System Power ....... 56
Local/Remote Power Control....... 57
Powering On the System ........ 57
In Host-Controlled Remote Mode .... 58
In Local-Controlled Mode ....... 59
Powering Off the System ........ 60
In Host-Controlled Remote Mode .... 60
In Local-Controlled Mode ....... 60
Emergency Power Off ........ 60
Shutting Down and Restarting the System . . . 61
Shutting Down the System ....... 61
Restarting the System ......... 62
Enabling and Disabling Attachments ..... 63
Remote Channel Enable/Disable...... 63
Local Channel Enable/Disable ...... 63
Enabling a Host Attachment ...... 64
Disabling a Host Attachment ...... 64
Adjusting the Display Touch Screen Monitor . . 65
User Controls ............ 65
On-Screen-Display Controls ....... 66
Adjusting the Print Position ........ 68
Adjusting the Volume of the Operator Alert
Assembly .............. 74
Advancing Forms Using the NPRO and NPRO
Page Functions ............ 75
NPRO Procedure ........... 75
Simplex Mode ........... 76
Duplex Mode ........... 76
NPRO Page Procedure ......... 76
Simplex Mode ........... 77
Duplex Mode ........... 77
Canceling a Job ............ 78
Changing the Password or Authorization Level 79
Checking for a Front-Facing Page ...... 81
Checking the Forms Alignment ....... 84
Checking Print Quality .......... 85
Cleaning the Oiler Belt .......... 86
Cleaning the Printer ........... 88
Connecting an Accessory to the Operator Alert
Contacts ...............101
Loading Forms (Simplex or Dual Simplex Mode) 102
Loading Forms (Duplex Mode) .......115
Adjusting the Stacker Table Height ......117
Preprocessing and Postprocessing Instructions 118
Powering On and Off Pre/Post Devices . . . 118
Enabling/Disabling Pre/Post Interfaces . . . 118
Using the Printer Stacker ........119
Error and Jam Recovery ........119
Adding Supplies ...........119
Nonprocess Runout (NPRO) .......120
Recovering from a Forms Jam (Simplex
Operations) ..............121
Jams Within the Printer Engine ......122
Jam Recovery Procedures ........123
Jams Between the Printer and a Postprocessing
Device ..............126
Recovering from a Forms Jam (Duplex
Operations) ..............127
Jams Within Printer 1 .........129
Jams Within Printer 2 .........131
Jam Between Printer 1 and Printer 2 ....134
Jams Between the Printer and a Postprocessing
Device ..............134
Recovering from a Forms Jam in the
Postprocessing Device ..........135
Clearing the Forms Path .........136
Transfer Station Area .........136
Fuser and Stacker Areas ........140
Stacker and Pendulum Area .......143
Suggestions for Preventing Jams .......144
Reporting Printer Usage .........146
Running Traces ............148
Adjusting the Preheat Temperature ......150
Poor Fusing - Simplex Mode .......151
Forms Stick Together .........151
Heat Damage — Printer Running .....151
Thread/Align Forms...........152
Forms Are Loaded Through Both Printers . . 154
Threading Without Printing ......155
Print While Threading ........156
Forms Are Not Loaded In Printer 2 .....158
Threading Without Printing ......158
Print While Threading ........160
Forms Are Broken Between the Printers . . . 162
Threading Without Printing ......163
Printing While Threading .......165
Threading the Buffer/Flipper Unit ......167
Straight Line Configuration .......167
Left Angle Configuration ........168
Unloading the Stacker ..........169
Switching Printer Modes (Dual Simplex/Duplex) 172
Switching from Duplex to Dual Simplex Mode 172
Switching from Dual Simplex to Duplex Mode 172
Switching Print Resolution.........174
© Copyright IBM Corp. 1998 55