Filter
Top Products
Running Traces
The Traces procedure lets you select, start, stop, and print traces.
Note
v Trace affects both printers when you are printing in duplex mode. In
simplex mode, all trace actions (Start, Stop, Save, and Print) apply to only
to that printer.
v Tracing may affect performance.
v The Configure... action requires Customer Engineer authorization.
1. SELECT the Analyze pull-down menu on the main Display Touch Screen
window.
2. SELECT the Traces procedure. The Traces window appears with a list of the
available traces and the current status of each.
3. To start a trace:
a. SELECT the trace you want to run from the Select a Trace box.
b. SELECT the Start Trace pushbutton.
4. To stop a trace:
a. SELECT the trace you want to stop from the Select a Trace box.
b. SELECT the Stop Trace pushbutton.
5. To save trace data:
a. Stop all traces.
b. SELECT the Save pushbutton.
c. Insert a diskette in the diskette drive, and SELECT Save on the verification
window that appears.
Figure 29. Traces Window
148 InfoPrint 3000 Operator’s Guide