Filter
Top Products
procedure will not start another procedure of the same type. The window will
display the procedure window at the front of the cascade. However, in dual
simplex mode the same procedure can be open and active on both Printer 1 and
Printer 2 Display Touch Screen windows.
Figure 9 shows:
1 The Main Window
2 Four of the five maximum procedure windows
3 The System Menu pull-down menu
4 The Switch to pop-up window, which lists all open procedures
5 A symbol that indicates that more than five procedures are open.
Use the scroll bar to the right of the Switch to pop-up window to view the names
of additional open procedures. When you select a procedure, the procedure
window appears at the front of the cascade.
Screen Saver Timeout
When there is no user interaction or error condition on the operator console for a
period of time, the console goes blank. Only a “floating” logo (screen saver)
appears.
To return to the normal display, simply touch the screen.
The screen saver timeout period (length of time without user interaction before the
screen saver comes on) is set under the Configure Printer procedure. The timeout
period ranges from 0 to 60 minutes. You may set different timeout periods for each
printer in duplex mode and for both Printer 1 and Printer 2 in simplex mode. In
Traces
Traces
Traces
Traces
Cancel Job
Enable/Disable Attachments
+
MORE
Cancel
Help
Print Samples
How Many?
1
Print
Switch To...
Print Screen
Close
Switch To
Print Samples
Enable/Disable Attachments
Traces
Cancel Job
HC6OG088
Operate
Configure
Analyze Options Help
Check Reset
NPRO Cancel Job
Ready
Text
3
4
2
1
5
Figure 9. Procedure Windows in Cascade Format
40 InfoPrint 3000 Operator’s Guide