Filter
Top Products
2. Press Menu/Enter. The printer goes offline (
not ready
).
For more information about program configuration values, see “Program
Configuration” on page 106.
To move within the Power On or Program Configuration menus, use the ↑, ↓, ←, and
→.
Exiting Printer Configuration
Power On Configuration:
After having set the desired values in the Power On Configuration menu, press
Menu/Enter to exit. The new values will be saved automatically.
Program Configuration:
After having set the desired values in the Program Configuration menu, scroll down
using the ↓ key until the message STORE=SAVE displays. Press Menu/Enter to save
these values in nonvolatile memory (NVM).
There are two other exit options, STORE=QUIT and STORE=CURRENT. STORE=QUIT exits
without saving the new values; the old values remain valid. STORE=CURRENT exits
without saving the new values in NVM, but the new values are valid until the printer
is powered off.
Power On Configuration
This section lists the categories available, the options for each category, and the
manufacturing defaults for the Power On Configuration menu. Each category is
described in detail on the pages following Figure 45 on page 83.
Notes:
1. After you make configuration changes, IBM recommends that you print your
changes and save the printout for future reference. For more information, see
“Printing Power On Configuration Setup” on page 105.
2. For information about entering and exiting printer configuration mode, see
“Entering Printer Configuration” on page 81 and “Exiting Printer Configuration”
on page 82.
3. For information about entering power on configuration from the Program
Configuration menu, see “Additional Entry Point to Power On Configuration
Menu” on page 119.
4. You can change the following configuration items only for the forms path for
which your printer is configured:
v Front Tear
v Rear Tear
v Paper Overlay
v Sequence
v Autoload
82 4247 Printer Model A00 User’s Guide