Filter
Top Products
2. For additional information on stacking, see “Setting Up Manual Sheet Feed
Path” on page 30 or “Chapter 3. Setting Up Another Forms Path” on page 39,
depending on your forms path.
Environmental Requirements
The printer operates best in business offices.
Attention: To prevent printer damage, do not power on (|) the printer immediately
after the printer has been moved from an environment that does not meet the
following operating requirements. Introduce the printer to the new operating
environment at least 24 hours before you power it on (|).
Operating Environment
The following tables show the operating environment requirements for the printer.
Variable Range or Value
Temperature 10° to 40° C (50° to 104°F) 16° to 32° C (60° to 90°F) with
ASF
Relative humidity 8% to 80%
Maximum wet bulb
temperature
26.7°C (80.0°F) 22.8°C (73.0°F) with ASF
Note: The best conditions for feeding and stacking are within a temperature range
of 15.6° to 32.2°C (60° to 90°F) and a relative humidity range of 26% to
62%.
Nonoperating Environment
The following tables show the non-operating environment requirements for the
printer.
Variable Range or Value
Temperature 10° to 51°C (50° to 125°F) 10° to 43°C (50° to 109°F) with
ASF
Relative humidity 8% to 80%
Maximum wet bulb
temperature
26.7°C (80°F) 27.0°C (80.6°F) with ASF
Shipping Environment
The following table shows the shipping environment requirements for the printer.
Variable Range or Value
Temperature -40° to 60°C (-40° to 140°F)
Relative humidity 5% to 100% (including condensation, excluding rain)
Maximum wet bulb
temperature
30°C (86°F)
Note: The printer must be covered in plastic.
160 4247 Printer Model A00 User’s Guide