Filter
Top Products
Printing Program Configuration Setup
IBM recommends that you print the Program Configuration at initial setup and after
you have changed your configuration. Save this printout for future reference.
You can save the configuration settings for as many as five forms paths. To print
the Program Configuration:
1. Press Menu/Enter. The printer goes offline, and the message PRINT OUT=NO
displays.
2. To print the settings on the printer, press →. The message PRINT OUT=YES
displays and the setup for the Program Configuration is printed.
Your printout will look similar to the sample in Figure 15 on page 29. This sample
printout shows three forms paths configured, and also depicts the default settings.
As shown in the sample, Rear Push is included on your printout even though your
printer may not be set up for the Rear Push forms path.
Figure 14. Power On Configuration Printout
28 4247 Printer Model A00 User’s Guide