Filter
Top Products
4. Close the forms guide and the top cover.
5. Reinstall the black protective cap on the electrical connector if you are not
installing this forms tractor into the printer. Store the forms tractor.
Preparing Printer for Selected Forms Path
You must perform the following procedures for the forms path you have chosen:
1. “Setting Forms Guide Deflector”
2. “Setting Push-Pull Selector” on page 46
3. “Removing or Installing Paper Bail” on page 47
4. “Setting Forms Tractors” on page 50
Setting Forms Guide Deflector
See Table 7 for the correct setting for your selected forms path.
Table 7. Setting the Forms Guide Deflector
Front Push
with Manual
Rear Push
with Manual
Dual Push
with Manual
Rear Pull Push Pull
Forms Guide
Deflector
Open Open Open Closed Closed
Set the forms guide deflector as follows:
1. Press Online to take the printer offline.
2. Open the top cover and the forms guide (see Figure 21 on page 45).
44 4247 Printer Model A00 User’s Guide