Filter
Top Products
FP
FP selects the forms path for loading, parking, or ejecting a form. The possible
values for FP are:
ASCII Hex Decimal Result
4 34 52 Single sheet loaded from ASF bin 3
5 35 53 Single sheet ejected (cutsheet), or single form feed
(continuous)
8 38 56 Single sheet loaded from ASF bin 1
9 39 57 Single sheet loaded from ASF bin 2
N 4E 78 Loads or Parks form from rear path
T 54 84 Loads or Parks form from front path
LP
LP causes the form to load or park in the path specified by FP. LP is used
only when FP=N or FP=T. The possible values for LP are:
Hex Decimal Result
00 0 Loads the form (after parking or ejecting any other forms)
01 1 Parks the form (requests 93 CONFIRM PARK before
parking the form)
Select Resident Font
This command selects the type of resident font to be used for printing.
ASCII DC4 DC4 ESC g RF
HEX 14 14 1B 67 RF
DECIMAL 20 20 27 103 RF
RF
RF specifies the character spacing value. The possible values for RF are:
Hex Decimal Resident Font
00 0 Courier
01 1 Gothic
80 128 OCR-B
81 129 OCR-A
Select Emulation
This command selects the printer emulation mode.
ASCII DC4 DC4 ESC Y SE
HEX 14 14 1B 59 SE
DECIMAL 20 20 27 89 SE
180 4247 Printer Model A00 User’s Guide