IBM A00 Printer User Manual


 
Installing Front Push Tractor
Install the tractor in the Front Push forms path, as follows:
1. Ensure the printer is powered off (O).
2. Lift the bottom edge of the front tractor cover into the open position.
CAUTION:
<3> The paper feed motor may get hot during operation. Avoid contact
when installing or removing the front tractor.
3. Rotate the hinged gear-protector cover forward and down. The cover must be
below the motor screw or the tractor will not seat.
Figure 7. Setting the Front Push Tractor to Straight (Viewed From Bottom)
Figure 8. Opening Front Tractor Cover
Chapter 1. Printer Setup 15