Filter
Top Products
6. Press ↓ until the message SEQUENCE=xxxxxx displays, where xxxxxx can be NONE,
FR+RR ASF1+2, ASF123. If you want to select a value other than the one
displayed, press ← or →.
7. To exit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
Alarm
The audible alarm will sound after you interrupt a
ready
condition. You can stop the
alarm after it begins sounding by pressing a key.
You can set the audible alarm by selecting one of the following values:
Yes (default) Alarm will sound.
No Alarm will not sound.
To change or check the Alarm control value:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
4. Press ↓ until the message FUNCTIONS displays.
5. Press → until the message FRONT TEAR=xxxx displays, where xxxx can be NORM,
AUTO,orNO.
6. Press ↓ until the message ALARM=xxx displays, where xxx can be YES or NO.If
you want to select a value other than the one displayed, press ← or →.
7. To exit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
Automatic Load
This parameter is available only for Manual Sheet Feed. You can set automatic load
to one of the following values:
Yes (default) Enables the quick printing function. This means that a single sheet
form will be loaded automatically when inserted into the printer.
No Disables the quick printing function. This means that a single sheet
form will not be loaded automatically when inserted into the printer.
To load the form, press Load/Form Feed.
To change or check the Automatic Load value:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
4. Press ↓ until the message FUNCTIONS displays.
5. Press → until the message FRONT TEAR=xxxx displays, where xxxx can be NORM,
AUTO,orNO.
6. Press ↓ until the message AUTOLOAD=xxx displays, where xxx can be YES or NO.If
you want to select a value other than the one displayed, press ← or →.
102 4247 Printer Model A00 User’s Guide