Filter
Top Products
You can configure the printer for any one of five forms paths; the Front Push, the
Rear Push, the Dual Push, the Rear Pull, or the Push Pull forms paths.
One forms tractor is supplied with the printer; this allows you to setup the Front
Push, the Rear Push, or the Rear Pull forms path. If you are setting up either the
Dual Push or the Push Pull forms path, install a second (optional) forms tractor.
Contact your IBM marketing representative to order this option.
v What type of interface cable was ordered?
See “Ordering Signal Cable” on page 153.
v Was an optional Automatic Sheet Feeder (ASF) ordered?
For information about setting up or using the ASF, refer to the
4247 Printer
Automatic Sheet Feeder Guide
.
v Was an optional printer stand ordered?
If you ordered a printer stand, you will find it in a separate shipping container.
See “Optional Printer Stand” on page 32 for more information about the optional
printer stand. Contact your IBM marketing representative to order this option.
CAUTION:
<1> The printer (without optional features attached) weighs approximately
24.9 kilograms (55 pounds). Before attempting to lift the printer, get help from
another person.
Unpacking Your Printer
Check the list below as you unpack the shipping container. Contact your local IBM
Branch Office if any of the following items or items listed on the printer order are
missing.
h Printer
h One forms tractor (and optional second unit, if ordered)
h Ribbon cartridge
h
4247 Printer Model A00 User’s Guide,
SA24-4400
h
4247 Printer Model A00 Quick Reference Guide,
SA24-4405
h Printer driver diskette
h Interface cable (if ordered)
h Power cord
h Operator panel overlay
h Wire forms guide (For Push forms paths)
h
4247 Printer Safety Notices,
SA24-4406 (outside USA)
2 4247 Printer Model A00 User’s Guide