Filter
Top Products
Installing Wire Forms Guide
The wire forms guide helps direct the forms for stacking in the Front Push and Rear
Push forms paths.
1. Open the acoustic cover and tilt it all the way back until it lays flat on the top
cover.
2. Insert one end of the wire forms guide into the hole on the right hinge block of
the acoustic cover. See orientation in Figure 1.
3. Insert the other end of the wire forms guide into the hole on the left hinge block
of the acoustic cover.
4. Close the acoustic cover.
Locating Operator Accessible Areas and Controls
As with many IBM printers, a part that is colored blue or has a blue decal on it is for
your use in operating the printer. These blue marks indicate tabs and levers that
control settings and changes for the machine.
xxxxx
xxxxx
xxxxx
xxxxx
xxxx
xxxx
xxxx
xxxx
xxxxx
xxxxxx
xxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxxxxxx
xxxxxxxx
xxxx xxxx
x
x
Figure 1. Installing Wire Forms Guide
Chapter 1. Printer Setup 5