Filter
Top Products
11. From the back of the printer, insert the forms (with the print side facing down)
through the rear tractor door. Guide the forms over the forms tractors.
12. From the front of the printer, place the left edge of the form under the forms
jam sensor, and on the left tractor pins so that the form engages about three
left tractor pins. Close the left tractor door.
13. Move the right tractor to the left and under the form until the holes along the
right edge of the form engage the same number of pins on the right tractor.
Close the right tractor door.
14. If necessary, slide the right tractor either left or right to remove any slack in the
form, ensuring that the left and right tractor pins are centered in the holes of
the form. Hold the right tractor in place and lock the right locking-lever by
pushing it away from you.
Figure 34. Installing Forms at the Rear of the Printer
56 4247 Printer Model A00 User’s Guide