Filter
Top Products
v 2 to 136 (at 10 CPI and Prop)
v 2 to 163 (at 12 CPI)
v 2 to 204 (at 15 CPI)
v 2 to 233 (at 17.1 CPI)
v 2 to 272 (at 20 CPI)
To change or check the Right Margin:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press ↓ until the message FORM SETTING displays.
3. Press → until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
LPI, 8 LPI, 12 LPI, 3L/30MM, 4L/30MM, 6L/30MM, 8L/30MM,or12L/30MM.
4. Press ↓ until the message RIGHT MARGIN=xxx displays, where xxx can be a value
from 2 to 272 depending on your character-per-inch setting. If you want to select
a value other than the one displayed, press ← or →.
5. To exit from Program Configuration, press ↓ until the message STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press ← or → to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Slashed Zero
You can set this value to:
No (default) All printed zeros will appear without a slash through them.
Yes All printed zeros will appear with a slash through them.
To change or check the Slashed Zero:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press ↓ until the message FORM SETTING displays.
3. Press → until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
LPI, 8 LPI, 12 LPI, 3L/30MM, 4L/30MM, 6L/30MM, 8L/30MM,or12L/30MM.
4. Press ↓ until the message SLASH ZERO=xxx displays, where xxx can be NO or
YES. If you want to select a value other than the one displayed, press ← or →.
5. To exit from Program Configuration, press ↓ until the message STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press ← or → to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Restore Manufacturing Defaults
You can set this value to:
No (default) Save the new values of the selected forms path.
Yes Return to the manufacturing default values of the selected forms
path.
To change or check the Manufacturing Default values:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press ↓ until the message FORM SETTING displays.
118 4247 Printer Model A00 User’s Guide