Filter
Top Products
Delete Character (DEL)
7F
This control removes the last text character on the print line and does not affect
control codes.
Escape Sequence Controls
Escape sequence controls have an ESC followed by one or more control
parameters. Supported escape sequence controls are:
Control Hex Name
ESC 1B Escape
ESC NUL 1B 00 Null (no operation)
ESC BEL 1B 07 Bell
ESC BS 1B 08 Backspace
ESC HT 1B 09 Horizontal Tab
ESC LF 1B 0A Line Feed
ESC VT 1B 0B Vertical Tab
ESC FF 1B 0C Form Feed
ESC CR 1B 0D Carriage Return
ESC SO 1B 0E Shift Out (Double-Wide Print)
ESC SI 1B 0F Shift In (Condensed Print)
ESC DC1 1B 11 Device Control 1 (Select, XON)
ESC DC2 1B 12 Device Control 2 (Cancel Condensed Print)
ESC DC3 1B 13 Device Control 3 (Deselect, XOFF)
ESC DC4 1B 14 Device Control 4 (Cancel Double-Wide Print)
ESC CAN 1B 18 Cancel
ESC EM 1B 19 Turn Automatic Sheet Feeder On or Off
ESC SP 1B 20 Set Intercharacter Spacing
ESC ! 1B 21 Master Select
ESC # 1B 23 Cancel MSB Control
ESC $ 1B 24 Set Absolute Print Position
ESC % 1B 25 Select User–defined Set
ESC & 1B 26 Define User–defined Characters
ESC * 1B 2A Select Graphics Mode
ESC - 1B 2D Auto Underscore
ESC / 1B 2F Select Vertical Tab Channel
ESC 0 1B 30 Set 1/8 Inch Line Spacing (8 LPI)
ESC 1 1B 31 Set 7/72 Inch Vertical Spacing
ESC 2 1B 32 Set 1/6 Inch Line Spacing (6 LPI)
ESC 3 1B 33 Set n/216 Inch Line Spacing
ESC 4 1B 34 Select Italic Mode
Appendix E. Epson FX-1050 Data Stream 223