Filter
Top Products
X'FE' Initializes printer to user-defined settings; downloaded fonts
are initialized. Settings are saved in non-volatile memory
(NVM).
X'FF' Initializes printer to factory settings; downloaded fonts are
initialized. Settings are saved in non-volatile memory
(NVM).
ID Printer ID Byte:
X'B6' For Native 4247 or 2381 emulation
X'03' or X'16' For 4202 III XL emulation
P1 Parameter Byte for Native 4247 or 2381 Emulation
X'00' No emulation change
X'01' Switch to 2381 emulation
X'02' Switch to Epson FX printer emulation
X'03' to X'FF' No emulation change
P1 Parameter Byte for 4202 III XL Emulation
Bit On Off
7 Discard Byte Ignore Process
6 Reserved
5 Alarm Disable Enable
4 Auto CR CR on Vertical Movement No CR on Vertical Movement
3 Auto LF Auto LF after CR No Auto LF after CR
2 Form Length 12 inch forms 11 inch forms
1 Zero Slashed Zero Normal Zero
0 Character Set PC Char Set 2 PC Char Set 1
P2 Parameter Byte for 4202 III XL Emulation
Bit On Off
7 Discard Byte Ignore Process
6 Print Language CP 850 Multilingual CP 437 ASCII
5 Direction Unidirectional Bidirectional
4 20 Condense 12+Condense = 12 CPI 12+Condense = 20 CPI
3 Select NLQ NLQ Gothic NLQ Courier
2 Form Feed Ignore FF if at TOF Honor all FF
1 Line Length 8 inch line 13.6 inch line
0 Sheet Feeder Enable Disable
Note: The following parameters are NOT modified by the INIT control byte.
Power On Configuration Menu:
v Pull
v Jam Sensors
v Parallel Interface:
– Interface Types, Select-In Signal, Data Bits, Buffer Size, and Emulation
210 4247 Printer Model A00 User’s Guide