Filter
Top Products
2. Press → and STORE=SAVE displays.
3. Press Menu/Enter again to save your change.
To quit without saving your change:
1. Press Menu/Enter. STORE=QUIT displays.
2. Press Menu/Enter to quit without saving any changes.
Checking Configuration
Printer configuration consists of Power On Configuration and Program
Configuration. “Chapter 4. Configuring Your Printer” on page 79 discusses printer
configuration.
If you change the forms path, you will need to configure the printer for your selected
forms path. Forms path configuration is discussed under the appropriate forms path
information in “Chapter 3. Setting Up Another Forms Path” on page 39.
There are many options to both Power On Configuration and Program
Configuration. You should print and save the current configuration. See “Chapter 4.
Configuring Your Printer” on page 79 for instructions about changing configuration
items.
Printing Power On Configuration Setup
IBM recommends that you print the Power On Configuration at initial setup and
after you have changed your configuration. Save this printout for future reference.
To print the Power On configuration:
1. Power off (O) the printer.
2. Press and continue to hold Menu/Enter while powering on (|) the printer until
(1) the message STARTING UP appears, (2) the boxes on the operator panel
display are solidly filled in, and (3) the printhead stops. This takes about fifteen
seconds. Do not release this key or press any other keys until this completes.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
4. To print the current settings on the printer, press →. The message PRINT OUT=YES
displays and the Power On Configuration setup printout starts printing. Your
printout will look similar to the sample in Figure 14 on page 28. This sample also
depicts the default settings.
Chapter 1. Printer Setup 27