Filter
Top Products
v 4202 III XL
v 2381
v Epson FX
To change or check the Emulation type:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
4. Press ↓ until the message PARALLEL INTF displays.
5. Press → until the message INTF=xxxxxxxxxxx displays, where xxxxxxxxxxx can
be CX PARALLEL, 1284 BYTE,or1284 NIBBLE.
6. Press ↓ until the message EMUL=xxxxxxxxxxx displays, where xxxxxxxxxxx can
be NATIVE 4247, 4202 III XL, 2381,orEPSON FX. If you want to select a value
other than the one displayed, press ← or →.
7. To exit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
Character Set
You can set the character set to one of the following values:
v PC1 (PC Character Set 1)
v PC2 (PC Character Set 2) (default)
v Italic (Epson FX only)
To change or check the Character Set:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
4. Press ↓ until the message PARALLEL INTF displays.
5. Press → until the message INTF=xxxxxxxxxxx displays, where xxxxxxxxxxx can
be CX PARALLEL, 1284 BYTE,or1284 NIBBLE.
6. Press ↓ until the message CHAR SET=xxxxxx displays, where xxxxxx can be PC1,
PC2,orITALIC. If you want to select a value other than the one displayed, press
← or →.
7. To exit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
Print Language
You can select any print language that is available for your printer. The following
print languages are available when printer emulation is set to Native 4247, 4202 III
XL, 2381, or Epson FX:
Arabic CP864
Arabic Extended CP1046
Baltic Multilingual CP921
Canadian French CP863
Cyrillic CP855
Chapter 4. Configuring Your Printer 87