Filter
Top Products
Shift In (ESC SI) / Condensed Print ................226
Device Control 1 (ESC DC1) / Select or XON ............227
Device Control 2 (ESC DC2) / Cancel Condensed Print ........227
Device Control 3 (ESC DC3) / Deselect or XOFF ...........227
Device Control 4 (ESC DC4) / Cancel Double-Wide Print ........227
Cancel (ESC CAN) ......................227
Turn Auto Sheet Feeder On or Off (ESC EM) ............227
Set Intercharacter Spacing (ESC SP) ...............228
Master Select (ESC !) .....................228
Cancel MSB Control (ESC #) ..................228
Set Absolute Print Position (ESC $) ................229
Select User-Defined Set (ESC %) ................229
Define User-Defined Characters (ESC &) ..............229
Select Graphics Mode (ESC *)..................230
Auto Underscore (ESC –) ...................230
Select Vertical Tab Channel (ESC /) ................230
Set 1/8 Inch Line Spacing (ESC 0) ................230
Set 7/72 Inch Line Spacing (ESC 1)................231
Set 1/6 Inch Line Spacing (ESC 2) ................231
Set n/216 Inch Line Spacing (ESC 3) ...............231
Select Italic Mode (ESC 4) ...................231
Cancel Italic Mode (ESC 5) ...................231
Printable Code Area Expansion (ESC 6) ..............231
Cancel Printable Code Area Expansion (ESC 7) ...........232
Copy ROM into Ram (ESC : NUL) ................232
Select Unidirectional Mode (one line only) (ESC <) ..........232
Set MSB to 0 (ESC =) .....................232
Set MSB to 1 (ESC >) .....................232
Reassign Graphics Mode (ESC ?) ................232
Initialize Printer (ESC @)....................233
Select n/72 Inch Line Spacing (ESC A) ..............233
Set Vertical Tabs (ESC B) ...................233
Set Page Length (ESC C) ...................233
Set Horizontal Tabs (ESC D) ..................234
Begin Emphasized Print (ESC E) .................234
End Emphasized Print (ESC F) .................234
Begin Double-Strike Print (ESC G) ................234
End Double-Strike Print (ESC H) .................234
Printable Code Area Expansion (ESC I) ..............235
Perform n/216 Inch Line Feed (ESC J)...............235
Select Single Density Graphics Mode (ESC K) ............235
Select Double Density Graphics Mode (ESC L) ...........235
Select 12 CPI (ESC M) ....................236
Begin Skip Perforation (ESC N) .................236
End Skip Perforation (ESC O) ..................236
Select 10 CPI (ESC P) ....................236
Select Right Margin (ESC Q) ..................236
Select Character Set (ESC R) ..................236
Begin Subscript/Superscript Mode (ESC S) .............237
End Subscript/Superscript Mode (ESC T) ..............237
Set Print Direction (ESC U) ...................237
Double-Wide Continuous Mode (ESC W) ..............237
Dual Density Bit Image Graphics Type 2 (ESC Y)...........238
High Density Bit Image Graphics (ESC Z) .............238
Set Relative Position (ESC \) ..................238
Set Letter Quality Justification (ESC a)...............239
Contents ix