IBM A00 Printer User Manual


 
Select n/72 Inch Line Spacing (ESC A) ..............200
Set Vertical Tabs (ESC B) ...................200
Set Page Length (ESC C) ...................200
Set Horizontal Tabs (ESC D) ..................201
Begin Emphasized Print (ESC E) .................201
End Emphasized Print (ESC F) .................201
Begin Double-Strike Print (ESC G) ................201
End Double-Strike Print (ESC H) .................201
Change Font (ESC I) .....................201
Relative Move Baseline (ESC J) .................202
Normal Density Bit Image Graphics (ESC K) ............203
Dual Density Bit Image Graphics Type 1 (ESC L) ...........203
Begin Skip Perforation (ESC N) .................203
End Skip Perforation (ESC O) ..................203
Proportional Space Mode (ESC P) ................204
Deselect on Positive Query Reply (ESC Q) .............204
Set Default Tabs (ESC R) ...................204
Begin Subscript / Superscript Mode (ESC S) ............204
End Subscript/Superscript Mode (ESC T) ..............205
Set Print Direction (ESC U) ...................205
Double-Wide Continuous Mode (ESC W) ..............205
Set Horizontal Margins (ESC X) .................205
Dual Density Bit Image Graphics Type 2 (ESC Y)...........206
High Density Bit Image Graphics (ESC Z) .............206
Print All Characters (ESC \) ...................206
Reverse Line Feed (ESC ]) ...................206
Print Single Character (ESC |)..................207
Continuous Overscore (ESC _) .................207
Relative Move Right (ESC d) ..................207
Relative Move Left (ESC e) ...................207
Select Line Scoring (ESC [ -) ..................207
Set Presentation Highlight (SPH) (ESC [ @).............208
Set Font Global (SFG) (ESC [ I) .................209
Set Initial Conditions (SIC) (ESC [ K) ...............209
Select Code Page (SCP) (ESC [ T) ................211
Set Print Quality (SPQ) (ESC [ d).................212
Buffer Terminating Conditions ...................213
About This Appendix
The IBM 4247 Printer implements a subset of PPDS. The environment in which the
printer data stream processor operates is described below.
If you are using the PPDS data stream commands, you use the commands in this
appendix, as well as those in Appendix C. Native 4247 Commands.
Print Job Processing
There are no PPDS controls that explicitly define print job boundaries. A print job for
the 4247 is established by the host system and consists of any set of related print
objects. A print job could be as short as one character or could be many pages
long.
184 4247 Printer Model A00 User’s Guide