Filter
Top Products
DANGER
<3> To avoid personal risk, do not install or reconfigure a communication
port or a teleport during a lightning storm.
To attach a parallel cable:
1. Power off (O) the printer. Disconnect the power cord from the receptacle.
2. Standing behind the printer, insert the parallel interface cable into the lower
connector at the bottom left of the printer.
3. Push the clips at each end of the connector into the notches on the parallel
cable.
4. Refer to your computer system documentation for information on attaching the
cable to your computer.
5. After you complete the attachment of the computer end of the interface cable,
connect the power cord to the printer and to the electrical receptacle.
6. Power on (|) the printer.
Attaching Serial Cable
DANGER
<2> To prevent serious personal injury from electrical shock when
connecting or disconnecting the interface cable, power off (O) the printer
and disconnect the power cord from the power source at the receptacle.
124 4247 Printer Model A00 User’s Guide