Filter
Top Products
SE
SE specifies the emulation mode. The possible values for SE are:
Hex Decimal Emulation Mode
01 Epson FX 1050
02 2 4202 Proprinter III XL
05 5 Native 4247 or 2381
Select AFTA in Column
This command selects the column at 10 CPI where Automatic Forms Thickness
Adjustment (AFTA) will be made.
ASCII DC4 DC4 ESC Z AA
HEX 14 14 1B 5A AA
DECIMAL 20 20 27 90 AA
AA
The value for AA is the column number. This value should not exceed the
maximum number of columns in the line.
Select/Deselect ASF Bin
This command selects the ASF bin to feed a new form or deselects (disables) the
printer after ejecting a printed form.
Note: This command must start and finish with a carriage return, line feed, or both;
otherwise, it will be handled as if it were printable data.
ASCII //BN //
HEX 2F 2F BN 2F 2F
DECIMAL 47 47 BN 47 47
BN specifies the ASF bin number to feed a new form, or BN is used to disable
printing after ejecting a printed form. The possible values for BN are:
ASCII Hex Decimal Result
1 31 49 Feed new form, ASF bin 1
2 32 50 Feed new form, ASF bin 2
3 33 51 Feed new form, ASF bin 3
C 43 67 Feed new form, ASF bin 1; then forms from ASF
bin 2
R 52 82 Disable printer to print after ejecting printed form
Appendix C. Native 4247 Commands 181