Filter
Top Products
DANGER
<3> To avoid personal risk, do not install or reconfigure a communication
port or a teleport during a lightning storm.
To attach a serial cable:
1. Power off (O) the printer. Disconnect the power cord from the receptacle.
2. Standing behind the printer, insert the serial interface cable into the upper
connector at the bottom left of the printer.
3. Tighten the two locking screws to hold the cable in place.
4. Refer to your computer system documentation for information on attaching the
cable to your computer.
5. After you complete the attachment of the computer end of the interface cable,
connect the power cord to the printer and to the electrical receptacle.
6. Power on (|) the printer.
Installing Printer Drivers
The IBM 4247 Printer is supported by the following operating systems or
environments:
v AIX version 3.2.5 and later
v OS/400 version 2.3 Host Print Transform
v OS/2 version 2.1 and later
v Windows version 3.0 and later
Chapter 5. Attaching Your Printer 125