Filter
Top Products
If you want to save the new value, press ← or → to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Hexadecimal Printing
You can set hexadecimal printing to either of the following values:
v No (default)
v Yes
If set to YES, any character sent to the printer will be printed in a hexadecimal
value. This lets you see a readable printout of all characters sent by the host to the
printer even if they are control code characters (for example, ESC, DC4, CR, LF).
To select Hexadecimal Printing, follow these steps:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press ↓ until the message HEX DUMP=NO displays. If you want to get a
hexadecimal printout, press ← or → to select HEX DUMP=YES.
3. To exit from Program Configuration, press ↓ and the message STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press ← or → to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
If you save HEX DUMP=YES, all characters will print in hex until you reset the value
to NO.
Store Mode
Once you made changes to any of the Program Configuration values, you have
three choices available for saving them:
Quit (default) Exit Program Configuration mode and no changes are saved in
NVM. All previous values remain valid.
Save Exit Program Configuration mode and save new values in NVM.
Current Exit Program Configuration mode and the new values remain valid
until the printer is powered off (O).
To select Store Mode in either of two ways:
1. Press Menu/Enter and the message STORE=QUIT displays.
or
Press ↓ until the message STORE=QUIT displays.
2. If you want to exit without saving the new values, press Menu/Enter.
3. If you want to save the new values, press ← or → to select either STORE=SAVE
(new values are stored in NVM) or STORE=CURRENT (new values remain valid until
the printer is powered off (O)).
4. Press Menu/Enter to save the new values.
120 4247 Printer Model A00 User’s Guide