Filter
Top Products
4. Connect the external power supply to an approved power source.
The PACKET indicator will flash during power-on and self-test. When the
indicator stops flashing and remains unlighted, the Network Print Server is ready
for use.
5. Power on (|) the printer. Make sure forms are loaded in the printer.
6. Press and hold the TEST button until the PACKET indicator starts to flash, then
release the button to print a print test sample. This sample lists the software
revision and the basic setup of your Network Print Server.
7. For more information on configuring and connecting your printer to an Ethernet
Network, see
Network Print Server for Ethernet Networks Administrator’s Guide,
(S246-0111) that was shipped with your Network Print Server.
130 4247 Printer Model A00 User’s Guide