Filter
Top Products
100
XS712T Smart Switch
6. Click Apply.
7. V
iew the STP Status information displayed on the screen.
Field Description
Configuration Digest Key This is used to identify the configura
tion currently being used.
Bridge Identifier The bridge identifier for the CST. It is made up using the bridge
priority and the base MAC address of the bridge.
Time Since Topology Change The time in seconds since the topo
logy of the CST last changed.
Topology Change Count The number of times the topology has changed for the CST.
Topology Change The value of the topology change parameter for the switch
in
dicating if a topology change is in progress on any port assigned
to the CST. The value is either True or False.
Designated Root The bridge identifier of the root bridg
e. It is made up from the bridge
priority and the base MAC address of the bridge.
Root Path Cost Path cost to the Designated Root for the CST.
Root Port Port to access the Designated Root for the CST.
Max Age (secs) Specifies the bridge maximum age for CST. The value must be less
than
or equal to (2 X Bridge Forward Delay) – 1 and greater than or
equal to 2 X (Bridge Hello Time +1).
Forward Delay (secs) Derived value of the Root Port Bridge Forward Delay parameter.
Hold TIme (secs) Minimum time between transmission of Configuration BPDUs.
CST Regional Root Priority and base MAC address of the CST Regional Root.
CST Path Cost Path Cost to the CST tree Regional Root.
8. Click Refresh to update the information on the screen with the most current data.